Enphase Q Cable connectors, strain relief

[ChrisBarrett]

I've been searching for strain relief connectors that have oval openings to fit a enphase Q cable. I just picked up this from home depot: https://www.homedepot.com/p/1-2-in-S...0661/100170032 and it fits perfectly.

However I just found this also: https://www.mouser.com/datasheet/2/1...ip-1314153.pdf

Just an FYI for future searchers of this info.
Cheers!

[Rizzm]

I'm absolutely SHOCKED that this doesn't come up more often. Working on my solo DIY roof installation and I've been racking my brain trying to find a way to get a waterproof entry of Enphase cable into a junction box.

[Mike90250]

I'm absolutely SHOCKED that this doesn't come up more often. Working on my solo DIY roof installation and I've been racking my brain trying to find a way to get a waterproof entry of Enphase cable into a junction box.

water seldom runs uphill. Use a drip loop.

https://blog.solidsignal.com/tutorials/what-is-a-drip-loop/

[ChrisBarrett]

you would still need strain relief, even if it's not water proof. It needed to be waterproof to pass code on my installation.

[Rizzm]

Sorry for resurrecting such an old post. I’ve been learning a whole lot and wanted to try my best at making connections raintight. I will combine these fittings with the drip loop.

[ChrisBarrett]

No worries, I created the post so people could find out this information in the future. I took me forever to find those two products that work with q cables and knockouts in J-boxes.