2 sist conected- variable A value -WHY?

[Mike90250]

cosmetic differences are cause to reject cells from the factory line, ones that "look different" are likely different. With homebuilt, you will never achieve the quality and longevity that the factory can achieve. Micro fractures in the cell surface can not be seen, but as a panel heats in the sun, the connections can move apart, and power drops off.

[MarineLiner]

With homebuilt, you will never achieve the quality and longevity that the factory can achieve.
Micro fractures in the cell surface can not be seen, but as a panel heats in the sun, the connections can move apart, and power drops off.

[MarineLiner]

hy, i just connected 2 solar panels ( 2x65W / 3.6A/12v ac) and the problem is that when i connect them in paralel i have variable value for the A(Amps), from 0.4 - 2 - 4 A.
do I have to put something beetwen the?
the solar charge is 20A

[colin]

the charge is oig t amps. i am illding aother one in this moment and i will see if with the ather one is making the same. hope is going to be finished in 3 days.
tnx allot for your suport.
regards calin

[MarineLiner]

You're welcome.
We eager to know how is the result.
Looking forward to hear.

[colin]

happy now

Hy all and tnx allot for your support.
I think i found the problem. I put a 3-d battery in paralel to charge and it's ok. It's look like the 2 bat. that i have were charge 90-100%, i didn't know that, and when its 100% the charge controller stop charging( the amps. value drops from 6, 7 amps to 0,2 .. 2,2... etc.)
With the 3 bat. it's going ok now, aprox. 7 Amps. . but i have to buy some more baterys because i am at the haff way with the 3rd panel).
TNX again for your help.
regards calin ireland

[MarineLiner]

Congratulation.
Thanks for sharing.
Everyone can take a lesson from this case.

[MarineLiner]

the charge is oig t amps.
i am illding aother one in this moment and i will see if with the ather one is making the same.