Hybrid system setup

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • monogram
    Member
    • Mar 2018
    • 77
    #1

    Hybrid system setup

    Hello everyone,

    I'm in process of setting up a system the can run some home appliances from batteries.

    I have a question for the design below: is there a way to keep the house line #13 & #16 (inside junction box) running if the Growatt Inverter / Charge Controller going bad?

    What need to be done make to make this design better?


    2020-10-16_134039.jpg
    Attached Files
    Tags: None
    • Mike90250
      Moderator
      • May 2009
      • 16020
      #2
      You have to have a transfer switch.

      What are you trying to do ? Create a blackout proof power supply for a fish tank ? A cooler with beer? Why not a simple grid tie if you want to save energy ?
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

        Comment

        Previous template Next
        Working...