Can you ID these connectors?

[LeeLewis]

SOLVED. See comment below.

I have a 10KW system that the installer has basically left me hanging with to maintain on my own. I'm ok with that but I need to figure out a few things.
One of those is the kinds of cables that the system is using.

The system is using a solar bridge manager which they left incomplete in terms of configuration.
It uses SolarBridge Sunpower Pantheon P250HV-208/240-0005 inverters and mage 250 / 6 pl us ac panels.

Does anyone know what kinds of connectors these are and more importantly, if there are any couplers available to go between each connection.
I see Y splitters that seem the same but I'm not sure if they are. Maybe you know?

The system is installed on a very steep hill so the top rows of panels are very hard to reach. In order to better monitor the system, I'd like to get readings from each inverter and each panel if I could. I know that the manager can do that but the installer refused to give me the password other than of course admin/admin which is useless so need to find some other way to manage this.

[chrisski]

Picture 1 looks like Anderson Powerpole 45 amp connectors. Picture 2 and 4 are possibly a Amphenol H4 connector. If so, the H4 will plug into a standard MC4 connector, but doing so would not have a UL rating. Picture 3 I think is a side view of the ANderson Powerpole 45 amp connectors.

[LeeLewis]

Hi, yup, looks like you have it on the 2/4 images.
https://www.solar-electric.com/amphe...nnector-1.html

I haven't looked at the panels and setup yet but assume these are the input/output from the panels.
I assume the other cables are linked in a parallel way so that even if one panel dies, the rest can still send power.

I cannot find that first one anywhere so far using the make/model you gave for item 1/3.

I'm wanting to find a coupler I can tap into for each of these connections so I can build my own monitoring system. By tapping into each output, I could know which is not producing which would make it easier to diagnose and know what I need to replace. The manager doesn't seem to provide enough information which is why the installer got frustrated. The setup is so hard to get at that the guy would have to spend hours trying to find the source of a problem.

[LeeLewis]

In case someone else is looking, I found the part numbers.

SBT-TCM-10 4-wire 20A transition cable for plugs.
SBT-TCF-10 4 wire 20A transition cable for Rec.
SBT-ECMM-10 4-wire 20A, Ext. cable for plug-plug.
SBT-ECFF-10 4-wire 20A Ext. cable for Rec.-Rec.

There is also a pigtail but I'm not sure what the part number is called.

[neweclipse]

Here ya go partner!

https://encitech.com/category/2343

https://www.mouser.com/datasheet/2/22/ds-solarspak-1608321.pdf

[LeeLewis]

Here ya go partner!

https://encitech.com/category/2343

https://www.mouser.com/datasheet/2/2...ak-1608321.pdf

Thank you very much.
Since you seem to know these, is there any chance you know of any couplers for either the H4 or the 4 wire connector that would work with these?
I'm trying to find male to female couplers where I might be able to tap into each wire and run that to a test box.
The reason is that the system is on a very hard to get at canopy and trying to test all of the panels and inverters is a major task.
If I could run wires from each line, I could terminate them into a panel box where I could test from.