Solaredge inverter reliability

[mploc]

I still like em. No cooling fans, so no cooling fan failures! These issues are probably just software, so they will fix over time.

Do they ever send software updates to the inverter? And what about people who are not connected to the internet?

[solarfrank]

software issues, make sure your inverter it is connected to the internet.

[NukeEngineer]

Do they ever send software updates to the inverter? And what about people who are not connected to the internet?

Yes, they do send updates every few weeks or so, plus or minus.

[Afrmthabay]

My inverter itself the new Solaredge HD Wave version 7600H has had no problems just one optimizer was not showing production for 15 minutes then corrected itself showing production . My co-worker just installed the same inverter with 28 panels Q-Cell 300 watts and no problems at all.

[AzRoute66]

Yes, they do send updates every few weeks or so, plus or minus.

Every few weeks? Unreal. Almost as bad as Java.

[Mike90250]

In "IoT", the S stands for Security.

[cebury]

The S is hidden behind the router/firewall where you are supposed to put it.

[TundraLu]

My inverter itself the new Solaredge HD Wave version 7600H has had no problems just one optimizer was not showing production for 15 minutes then corrected itself showing production . My co-worker just installed the same inverter with 28 panels Q-Cell 300 watts and no problems at all.

I just installed a 7600 HD Wave and all is well for now .

[Ben25]

I've found that with the HD wave inverters, you need to make sure the latest firmware has been installed. They can upgrade it remotely as well. Plenty of bugs but they seem to have mostly worked them out by now.

[Tdjj93]

Enphase all day baby check out their new IQ7 much more reliable than solar edge which is **** imo.

[Mike90250]

Enphase all day baby check out their new IQ7 much more reliable than solar edge which is **** imo.

Them's bold words partner. We've gots lots of dead enphase - older models sure, but new stuff is too new to make claims

[ButchDeal]

Enphase all day baby check out their new IQ7 much more reliable than solar edge which is **** imo.

(your worthless opinion deleted)

First it is SolarEdge not "Solar Edge" if you are going to try to come across as having an opinion worth hearing, at least know the name of the company you are trying to bad mouth.

Now you are talking about the wonderful reliability of a product that is barely shipping: "Limited Availability Until Summer 2018"
https://enphase.com/en-us/products-a...verters/family

Also the IQ series orphaned the S series which a lot of people purchased in 2017, leaving them with little choice but to replace or have two different systems.
The company is still financially as red as it can get and predicting more red in 2018: https://finance.yahoo.com/quote/ENPH/

[Afrmthabay]

I've found that with the HD wave inverters, you need to make sure the latest firmware has been installed. They can upgrade it remotely as well. Plenty of bugs but they seem to have mostly worked them out by now.

I just got an error code on my Solaredge 7600HD inverter-says 18xB7 then it says HW error and the red fault light is on. I called Solaredge support and they said they are updating the firmware and said it will take all night and to check tomorrow if it fixes the issues

[dailo]

I hit this error once while charging my car. After resetting the unit it came back up and haven't seen it since. Curious to hear what version you end up getting.

I just got an error code on my Solaredge 7600HD inverter-says 18xB7 then it says HW error and the red fault light is on. I called Solaredge support and they said they are updating the firmware and said it will take all night and to check tomorrow if it fixes the issues

[Afrmthabay]

I hit this error once while charging my car. After resetting the unit it came back up and haven't seen it since. Curious to hear what version you end up getting.

thats exactly what I was doing charging my car