Self consumption Sizing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Bendesa1962
    Solar Fanatic
    • Nov 2016
    • 110
    #1

    Self consumption Sizing

    Hi All,

    Just curious about your opinions.

    How do you design / size the maximum capacity of a PV System that you want to be self-consuming. (No export to the grid)

    So it's a grid tied PV System. No storage equipment. Just verry simple Grid Tied.

    Let's assume there is an average evenly distributed consumption (load) during the daylight hours of 150.000 Watt

    How would you calculate / size the system ?

    Many thx in advance for your contribution

    Kind regards

    B
    Tags: None
    • Mike 134
      Solar Fanatic
      • Jan 2022
      • 423
      #2
      06-16-2022, 09:05 AM
      Hi Suneagle
      thx for your replay. This projects is just South of the E. I ask this question because there seemed to be different opinions on this.

      And you're right it's not for a residential installation. It's an industrial project of total 1 MW.

      Thx for your contribution.

      How did this project workout for you?

        Comment

        • J.P.M.
          Solar Fanatic
          • Aug 2013
          • 14995
          #3
          Originally posted by Mike 134
          06-16-2022, 09:05 AM
          Hi Suneagle
          thx for your replay. This projects is just South of the E. I ask this question because there seemed to be different opinions on this.

          And you're right it's not for a residential installation. It's an industrial project of total 1 MW.

          Thx for your contribution.

          How did this project workout for you?
          Is this post in the right thread ?

            Comment

            • SunEagle
              Super Moderator
              • Oct 2012
              • 15151
              #4
              Originally posted by Mike 134
              06-16-2022, 09:05 AM
              Hi Suneagle
              thx for your replay. This projects is just South of the E. I ask this question because there seemed to be different opinions on this.

              And you're right it's not for a residential installation. It's an industrial project of total 1 MW.

              Thx for your contribution.

              How did this project workout for you?
              Is that question directed to me or to Bendesa1962?

                Comment

                • Mike 134
                  Solar Fanatic
                  • Jan 2022
                  • 423
                  #5
                  Originally posted by SunEagle

                  Is that question directed to me or to Bendesa1962?
                  Bendesa

                    Comment

                    • Bendesa1962
                      Solar Fanatic
                      • Nov 2016
                      • 110
                      #6
                      Originally posted by Mike 134
                      06-16-2022, 09:05 AM
                      Hi Suneagle
                      thx for your replay. This projects is just South of the E. I ask this question because there seemed to be different opinions on this.

                      And you're right it's not for a residential installation. It's an industrial project of total 1 MW.

                      Thx for your contribution.

                      How did this project workout for you?
                      Hi Suneagle,

                      I guess this question is about the different orientations of different strings on 1 MPPT right?

                      Well the project is still in the phase of designing and there are some different opinions about this topic.
                      Personally I think the difference between those two options are negligible because it's located so close to the equator.
                      The tilt of the roofs is only 15 degrees,

                      So I think it's not necessary to use two different orientations on 1 MPPT.

                      Kind regards

                      B

                      PS What are your thoughts on the self consumption question?








                        Comment

                        • SunEagle
                          Super Moderator
                          • Oct 2012
                          • 15151
                          #7
                          Originally posted by Bendesa1962

                          Hi Suneagle,

                          I guess this question is about the different orientations of different strings on 1 MPPT right?

                          Well the project is still in the phase of designing and there are some different opinions about this topic.
                          Personally I think the difference between those two options are negligible because it's located so close to the equator.
                          The tilt of the roofs is only 15 degrees,

                          So I think it's not necessary to use two different orientations on 1 MPPT.

                          Kind regards

                          B

                          PS What are your thoughts on the self consumption question?







                          If the array is on or close to the E then it really doesn't matter which way they are pointed. The wiring to the inverter will depend on the maximum allowed input so IMO if the inverter has more then one inputs then splitting the number of panels and wiring half to each input makes sense to me.

                          As for the self consumption question. That will depend on what your loads are and when they are being used. I believe some grid tie inverters can be programmed so as not to sell back any excess power that is not consumed by the loads. But that is something you need to engineer into the design.

                            Comment

                            • Mike90250
                              Moderator
                              • May 2009
                              • 16020
                              #8
                              If you aim for zero grid export in the the winter, you will be overpaneled come summer. But maybe you will kick on the big air conditioners then. There are
                              many details to factor:
                              Times of power usage
                              Usable solar hours / obstructions winter/summer
                              Is there a cost goal ?
                              does your utility not allow grid export, or are you trying to sneak in under the radar ?
                              Backup solar or generator power if grid is down ?
                              Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
                              || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
                              || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

                              solar: http://tinyurl.com/LMR-Solar
                              gen: http://tinyurl.com/LMR-Lister

                                Comment

                                • Bendesa1962
                                  Solar Fanatic
                                  • Nov 2016
                                  • 110
                                  #9
                                  Ok let's open up and give you more information.


                                  The project is realized under BOT Built Operate Transfer. With a zero investment for the client.

                                  The PV System will be installed on the factory roof of the client.

                                  An Investor will finance the whole system

                                  The client buys the produced kWh by the PV System against a tariff of minus 10% of the utility company

                                  The investor operates and maintains the system for a period of 20 years

                                  After 20 years the system is transferred to the client.

                                  The country is Indonesia


                                  All kWh that are exported to the grid will not be payable for the investor so no revenue

                                  The Utility company does not give any credit for the exported kwh

                                  So I'm looking for the balance between maximum capacity PV System and maximum savings for the client and maximum

                                  revenue for the investor.

                                  How would you determine the maximum PV System Capacity?


                                  And yes I know many variables are involved and that the numbers are not static


                                  I'm just curious what are your thoughts on this


                                  Many thanks in advance


                                  Kind regards


                                  B

                                    Comment

                                    Previous template Next
                                    Working...