combination series, and parralell solar pnels

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sarah
    Junior Member
    • Jul 2011
    • 3

    #16
    I think being a jerk to noobs should get you moderated and thrown out.

    Comment

    • Mike90250
      Moderator
      • May 2009
      • 16020

      #17
      A 2 word, generic reply to a 13 message post, is pointless. If you expounded, and let us know what about the previous 13 posts, was useful to your situation, it makes you look like a person, and not a spammer, building posts, in order to to gain PM privileges. it's a constant battle to keep the link droppers and spam posters, off the messages. When your IP address is masked, as yours is, it's another point to possible spammer. But I did not ban you, 'cause there was no link or overt spam. yes, I've done 2 of those today, and it's not even noon.

      So share with us, your interest or problem.

      Mike
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

      Comment

      • sarah
        Junior Member
        • Jul 2011
        • 3

        #18
        Im at work, I'm assuming they have the IP address's blocked. I have no interest in gaining any kind of privileges in this forum, I stumbled upon it while researching parralell/series combinations for a project i'm working on. I found the drawings of the set up VERY INFORMATIVE.

        Attacking someone like that is just rude and uncalled-for.

        Comment

        • russ
          Solar Fanatic
          • Jul 2009
          • 10360

          #19
          Originally posted by sarah
          Im at work, I'm assuming they have the IP address's blocked. I have no interest in gaining any kind of privileges in this forum, I stumbled upon it while researching parralell/series combinations for a project i'm working on. I found the drawings of the set up VERY INFORMATIVE.

          Attacking someone like that is just rude and uncalled-for.
          Get real!
          [SIGPIC][/SIGPIC]

          Comment

          Working...