one smallish inverter for the small loads, and one large inverter for the large loads ?
Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
Thanks! Yes it will be completely off grid. Not sure how large to size it. basically we are talking 2 LCD desktops + laptop + 32" LCD tv + internet routers ect used all day long + maybe 100 watts of cfl lighting used for like 3 hrs total a day. THis is in Hawaii so sun isn't too much of a concern but hard to get a handle on estimates since my fridge, stove and water heater are all electric but the place we are building will be all propane except fridge being a concerted chest freezer.
Is this a battery system? If so multiple inverters is the right approach.
One section of my smallish roof faces North East and the other section faces North West (southern hemisphere). I have a PV array on both sections with separate inverters. The North east PV array catches the early morning to afternoon sun, the North West PV array catches the mid morning to late afternoon sun. This design averages 18kwh per day. I have Sunny Boy inverters which I would recommend as they have an extended warranty.
Comment