Setting up a "Generator Warm" up time using Schneider AGS and COM Box

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ligwyd
    Junior Member
    • Mar 2016
    • 4
    #1

    Setting up a "Generator Warm" up time using Schneider AGS and COM Box



    Wondering if anyone here has successfully set up a "Generator Warm" up time before loading, using Schneider AGS and COM Box.
    I find it hard to believe that Schneider did not build in a warm up time setting in the older COM Box. Supposedly it is built into the Gateway and Insight.....
    Appreciate any feedback from anyone here that may have been down this road before.
    John
    Last edited by sdold; 09-22-2021, 01:37 PM. Reason: Moved from another thread
    Tags: None
    • checkthisout
      Member
      • Mar 2019
      • 76
      #2
      Originally posted by ligwyd

      Wondering if anyone here has successfully set up a "Generator Warm" up time before loading, using Schneider AGS and COM Box.
      I find it hard to believe that Schneider did not build in a warm up time setting in the older COM Box. Supposedly it is built into the Gateway and Insight.....
      Appreciate any feedback from anyone here that may have been down this road before.
      John
      What does the COM box do?

        Comment

        Previous template Next
        Working...