What style of Tracker is this?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • littleharbor
    Solar Fanatic
    • Jan 2016
    • 1998

    #61
    Just a guess here but if these are typical 72 cell panels using 5" cells, (160-190 watt) this array would be approx. 43 x 76 feet , 14 x 16, 32" x 65" panels. That's one heckuva large rack to keep from blowing apart in a wind storm. Quite impressive.
    2.2kw Suntech mono, Classic 200, NEW Trace SW4024

    Comment

    • SunEagle
      Super Moderator
      • Oct 2012
      • 15161

      #62
      Originally posted by littleharbor
      Just a guess here but if these are typical 72 cell panels using 5" cells, (160-190 watt) this array would be approx. 43 x 76 feet , 14 x 16, 32" x 65" panels. That's one heckuva large rack to keep from blowing apart in a wind storm. Quite impressive.
      It seems that design is installed in a lot of places around Ontario. My guess is that they all come from the same designer.

      Comment

      • Higher-Ground Farm
        Junior Member
        • Dec 2015
        • 48

        #63
        Wow, about 44KW ! 220 panels times about 200W?

        Comment

        • J.P.M.
          Solar Fanatic
          • Aug 2013
          • 15015

          #64
          Originally posted by SunEagle

          Probably some pretty big columns or a steel structure that can withstand high winds. Not something most home owners will be able to build.
          Yea, I think my HOA would have a problem with such an array configuration.

          But, as a professional curiosity, I'd still like to get a look at the design under the skin, particularly the foundation details.
          .
          In terms of cost, I'd have a hard time thinking such a design could be as cost effective as the solar farm configuration that is common in the U.S. and elsewhere using rows of single axis tracking, but perhaps the cost/worth of land removed from use for other/dual use is a consideration as well as snow removal, although I can't see an advantage to the pictured design for maint./snow removal.

          Over the years, I've come to respect Canadian design approaches as being innovative and in my engineering opinion, usually/often quite elegant and original, but this one's a head scratcher for me.

          Comment

          • jonatuna
            Junior Member
            • Oct 2014
            • 6

            #65
            One reason that these are on rooftop might be Ontario's Feed in Tarrif (FIT) program. Prices are / were higher for roof top than for ground mount, and depending on when they were installed it may have been worth it to go with roof mount. When we installed in 2012, contract prices were $.548/kWh for roof mount between 10 and 100kW, and $0.388 for ground mount. Maybe then the extra costs is balanced out by 40% higher revenues? More so, if you needed storage buildings as well...

            'tuna

            Comment

            • MikeCanuck
              Junior Member
              • Nov 2015
              • 29

              #66
              I was also interested in the structure of the building and how it held up such a massive array. Here is my final pic showing inside of the storage unit that was open.
              I was tempted to go inside to take pictures of the inside structure, but being your typical nice law abiding Canadian, that didn't seem right.
              So this is the best I have for my 5+ hour drive out there. It looks just to rely on the triangular support structure of the building?
              Inside was basically empty for storage of pallets of farming chemicals, which I've blanked out.
              Attached Files

              Comment

              • J.P.M.
                Solar Fanatic
                • Aug 2013
                • 15015

                #67
                Originally posted by MikeCanuck
                I was also interested in the structure of the building and how it held up such a massive array. Here is my final pic showing inside of the storage unit that was open.
                I was tempted to go inside to take pictures of the inside structure, but being your typical nice law abiding Canadian, that didn't seem right.
                So this is the best I have for my 5+ hour drive out there. It looks just to rely on the triangular support structure of the building?
                Inside was basically empty for storage of pallets of farming chemicals, which I've blanked out.
                My guess is more than a usual amount of any beef in the support structure goes to support the wind load and vibration dampening.

                As for politeness and not getting snagged by the OPP, sorrreee about that ehh ?

                Thanx again for the flix.

                Regards,

                Comment

                Working...