Inverter for Nickel batteries.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AzSun
    Member
    • May 2011
    • 32
    #1

    Inverter for Nickel batteries.

    I am looking for a 12V sine wave inverter in the 300 - 600 watt range that can tolerate a large swing in battery input voltage as experienced with Nickel Iron batteries. 11 - 16.5 volts without alarming would be nice. Do they exist ?

    Thanks
    Tom
    Tags: None
    • Mike90250
      Moderator
      • May 2009
      • 16020
      #2
      Not any flexible 12v inverters, you have to get up the the high grade, high dollar ones to get NiFe batteries to work with it.
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

        Comment

        Previous template Next
        Working...