Where to keep batteries?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sunking
    Solar Fanatic
    • Feb 2010
    • 23301

    #31
    Originally posted by dbldrew
    Yes using the re-bar as a ground is to protect against lightning strikes, lightning also strikes trees, should wood also not be used? Its completely different animal comparing the power of lightning and what it can flow through vs what a battery can flow power through.

    Why not test it to prove all the battery manufactures wrong? Ground out a battery into your concrete floor and use a volt meter to see how much power is actually flowing into the concrete.
    Does not sound like you know much about electricity and current flow. All you references are in respect to storage, not operation. I am tired of trying to tell you what can happen, and why. Good luck.
    MSEE, PE

    Comment

    • dbldrew
      Junior Member
      • Jun 2010
      • 8

      #32
      Originally posted by Sunking
      Does not sound like you know much about electricity and current flow. All you references are in respect to storage, not operation. I am tired of trying to tell you what can happen, and why. Good luck.
      So once I challenge you to actually test and prove what your saying your done with the conversation? Ok that

      Comment

      • Sunking
        Solar Fanatic
        • Feb 2010
        • 23301

        #33
        [QUOTE=dbldrew;11124]So once I challenge you to actually test and prove what your saying your done with the conversation? Ok that
        MSEE, PE

        Comment

        • dbldrew
          Junior Member
          • Jun 2010
          • 8

          #34
          Originally posted by Sunking
          The bond of a contaminated battery in contact with the concrete resistance is unknown.
          Or maybe it's known by the battery manufactures, and that is why that its listed as a non issue? Either way why are you arguing about it if you admit to not knowing? The real experts have listed it as a myth, you admit to really not knowing the answer, but are so adamant to argue that you are right.

          Ok thats fine argue away, but this is my last post on the subject, and I personally I'm going to believe the battery manufactures on this issue over some random guy on an internet forum (who just admitted he really doesn

          Comment

          • Sunking
            Solar Fanatic
            • Feb 2010
            • 23301

            #35
            Originally posted by dbldrew
            Or maybe it's known by the battery manufactures, and that is why that its listed as a non issue? Either way why are you arguing about it if you admit to not knowing? The real experts have listed it as a myth, you admit to really not knowing the answer, but are so adamant to argue that you are right.
            Oh I don't know, only been working with battery plants for over 30 years and worked with every major battery manufacture out there. Also have written a lot of battery plant standards for companies like ATT, Verizon with the battery manufactures input, and set on NEC code panel # 5 which covers NEC articles 250 (Grounding and Bonding) and 668 (Electrolytic Cells, and 690 (Photovoltaic System).
            MSEE, PE

            Comment

            Working...