Tweet
Battery layouts with little space.
In my non-Mobil RV there's little room. Picture where the Captain chairs were and that's what I have to work with. 2 1/2
-
-
part of your post was truncated. Try to use simple, plain unformatted text, or the anti-spam sw gets excited.
This may be a good application for Li batteries, compact, lightweight, but not for the first timers.Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-Lister -
Sure. I have very little space. I have 2 spaces that are 4 sq ft. 3ft apart. With no space,I was in need of a way to parallel them. The terminals are on the same side. When it comes to keeping cables short, I would have to make new ones 2awg to stagger these batteries to fit. They're basically 11x7. I only need to fit 6 to 8 to each space. Both banks will be on seperate pv modules. Thanks. Later.Comment
Comment