Tweet
Im still clueless about the Tabbing and Busbar. And how much current can pass through them.
I have various tabbing and busbar.
For example I have
0,2x2mm
0.16x1.8mm
How do I figure out how much amp can go through this stuff
I ask supplier for info on the 0.16x1.8mm and he gave me this spec 1, copper: oxygen-free copper content ≥99.97%
2, copper resistivity: OFC ≤0.01724Ωmm2 / m
3, the coating composition: 60% Sn 40% Pb
4, solder melting point: 179-224 ℃
5, coating thickness: 0.01 ~ 0.04mm can be customized, double-sided uniform coating
6, ribbon elongation: soft state ≥25%, ≥15% semi-soft state
7, the width of error: ± 0.05mm thickness error: ± 0.005mm
I have various tabbing and busbar.
For example I have
0,2x2mm
0.16x1.8mm
How do I figure out how much amp can go through this stuff
I ask supplier for info on the 0.16x1.8mm and he gave me this spec 1, copper: oxygen-free copper content ≥99.97%
2, copper resistivity: OFC ≤0.01724Ωmm2 / m
3, the coating composition: 60% Sn 40% Pb
4, solder melting point: 179-224 ℃
5, coating thickness: 0.01 ~ 0.04mm can be customized, double-sided uniform coating
6, ribbon elongation: soft state ≥25%, ≥15% semi-soft state
7, the width of error: ± 0.05mm thickness error: ± 0.005mm