I have 3 devices I need to charge from mobile solar panel.
1. PHONE: Samsung Note -2 (5V/2A USB)
2. TABLET: Samsung Slate-7 (DC 19V/2A DC output)
3. MARINE BATTERY (12V/4A DC output)
I bought 80W solar panel and MPPT controller to deliver 12V battery charging. USB charging worked fine but I could not charge my tablet for some reason.
The current and voltage I listed above was taken from my power supply. When I measured open circuit voltage on my tablet power supply it was 19.4-19.6V
I measure the voltage in the solar panel DC output on a bright sunny day and I have had 19.4V. With the 80W this panel can deliver 4A easily. For some reason when I plugged in my tablet it wasn't charging (and I'm sure polarity was OK).
I'm pulling my hair out to figure out what is going on. Tired to call Samsung Tech Supp fo advice but their tech supp sucks. I wonder if I should get 24V panel and use MPPT to lower it to (perhaps) 20V to see if it is working. Unfortunately panels over 20W are usually available only on-line and every return/test cost me extra $$ (as I have to pay the shipping).
Any ideas appreciated.
ARTHUR
1. PHONE: Samsung Note -2 (5V/2A USB)
2. TABLET: Samsung Slate-7 (DC 19V/2A DC output)
3. MARINE BATTERY (12V/4A DC output)
I bought 80W solar panel and MPPT controller to deliver 12V battery charging. USB charging worked fine but I could not charge my tablet for some reason.
The current and voltage I listed above was taken from my power supply. When I measured open circuit voltage on my tablet power supply it was 19.4-19.6V
I measure the voltage in the solar panel DC output on a bright sunny day and I have had 19.4V. With the 80W this panel can deliver 4A easily. For some reason when I plugged in my tablet it wasn't charging (and I'm sure polarity was OK).
I'm pulling my hair out to figure out what is going on. Tired to call Samsung Tech Supp fo advice but their tech supp sucks. I wonder if I should get 24V panel and use MPPT to lower it to (perhaps) 20V to see if it is working. Unfortunately panels over 20W are usually available only on-line and every return/test cost me extra $$ (as I have to pay the shipping).
Any ideas appreciated.
ARTHUR
Comment