Hi
I am trying to set up a solar powered system to power a heated water bucket for my horse. Heres what i have:
-Solar Panel NEW(i dont have it right here but its the kind you set up for a motor home to power small appliances)
-Deep cycle boat battery USED (which started full)
-Heated water bucket NEW (200 watt)...also has thermostat so will only draw power when temp drops(which is often up here...just finished a cold snap of -25)
-Inverter NEW (have the 750 watt one in hopes i can get this to work and set up two buckets eventually)
Panel is on side of horse shelter(facing South...this is what i was told to do up here in Northern BC)
Panel connects to battery with aligator clips(think thats what they are called), inverter connects to battery(again aligator clips), bucket plugged into inverter(well, power cord since its all on roof of shelter to keep naughty ponies out of it).
When i originally set it all up everything ran great, power to bucket was good, battery showed full, panel seemed to be working. Over night(the first night) it died sometime, water froze and no more juice to bucket. Now, it seems that the panel i got should be big enough to keep battery topped up to run this bucket especially since it wont run all the time. I'm really hoping to find someway to get this to work. I'm sorry if this is long but hoping to get all the details out there so someone can figure this out for me.
Thanks in advance for the help
Kat
I am trying to set up a solar powered system to power a heated water bucket for my horse. Heres what i have:
-Solar Panel NEW(i dont have it right here but its the kind you set up for a motor home to power small appliances)
-Deep cycle boat battery USED (which started full)
-Heated water bucket NEW (200 watt)...also has thermostat so will only draw power when temp drops(which is often up here...just finished a cold snap of -25)
-Inverter NEW (have the 750 watt one in hopes i can get this to work and set up two buckets eventually)
Panel is on side of horse shelter(facing South...this is what i was told to do up here in Northern BC)
Panel connects to battery with aligator clips(think thats what they are called), inverter connects to battery(again aligator clips), bucket plugged into inverter(well, power cord since its all on roof of shelter to keep naughty ponies out of it).
When i originally set it all up everything ran great, power to bucket was good, battery showed full, panel seemed to be working. Over night(the first night) it died sometime, water froze and no more juice to bucket. Now, it seems that the panel i got should be big enough to keep battery topped up to run this bucket especially since it wont run all the time. I'm really hoping to find someway to get this to work. I'm sorry if this is long but hoping to get all the details out there so someone can figure this out for me.
Thanks in advance for the help
Kat
Comment