Help Required for Installing Solar Energy at my Home

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Mike90250
    Moderator
    • May 2009
    • 16020
    #16
    Originally posted by hayatpower
    Dear Mike,

    First of all i would like to say thanks for your kind help.

    Second thing: Why are you angry? You are a Moderator of this site and you should be calm and responsive.
    If you think that i am wasting your time than for what purpose you are on this site???

    If you are a moderator than its your duty to help those members who need some awareness or information regarding solar energy. If you will not help and think that members are wasting your time than who will join your website?

    I was just trying to get the answer of my questions as i am a newbie in the field of Solar Energy. Sorry if i wasted your valuable time.

    Thanks once again.
    I'm not angry, just disturbed that my valuable time was spent going in circles with you. Over, and over.
    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

      Comment

      • russ
        Solar Fanatic
        • Jul 2009
        • 10360
        #17
        Typical - I face this daily. No parameter is ever set until a project is complete.

        Some wonderful people here but too many like this fellow also.
        [SIGPIC][/SIGPIC]

          Comment

          • inetdog
            Super Moderator
            • May 2012
            • 9909
            #18
            Originally posted by russ
            No parameter is ever set until a project is complete.
            Isn't that why the only drawings worth having are the as-builts?
            Now if only you could get those up front. (In another forum there is discussion of inspectors who want to see the field tests of efficient lighting systems signed off before they approve the permit to start installing. )
            SunnyBoy 3000 US, 18 BP Solar 175B panels.

              Comment

              Previous 1 2 template Next
              Working...